About 45 years ago I decided to make a midrange horn similar to the Klipschorn midrange horn to go with my one-off Klipschorn that I made from 3/4" plywood. I based the design not on actual plans but on photographs of the Klipshcorn I found in an audio magazine.
I no longer have the old home made "Klipschorn" but I do still have two midrange horns I made from 1/4" plywood.
The other thing I still have is the solid pine mold I used to form the midrange horns over.
Quite recently, I decided to make another midrange horn using this same mold.
In the photos you can see this "new" horn with a special stand to support it. It is resting on a genuine Klipsch La Scala. On the floor is the pine mold.
 |
| New Midrange Horn, Klipsch La Scala, and Pine Mold |
 |
| New Midrange Horn |
